NNTP Probe¶
NNTP probe does a connection to NNTP server. After receiving the response from NNTP server it sends the QUIT command to terminate the connection.
The connection status is saved in the property nntpstatus and the response in the property nntprespmsg.
Service - NNTP Probe
Probe Interval¶
- File Configuration field:
- nSleepTime
- Description:
- This is the interval of the probe. After each probe, the Service will sleep for the configured probe interval. This period is specified in milliseconds.
Timeout Limit¶
- File Configuration field:
- nTimeOutLimit
- Description:
- The amount of time (in milliseconds) the remote system is expected to answer in. If no response is received within this period, the probe fails and an event is generated. The default value of 1000 milliseconds is a proper value for most well connected networks. If the probe runs against a heavily loaded system and/or slow network link, the amount must be adjusted accordingly.
Generate an event if NNTP Probe was successful¶
- File Configuration field:
- nGenerateOnSuccess
- Description:
- When checked, an event is generated every time. If unchecked, it is generated only when the NNTP probe fails. The most common option is to leave it unchecked to catch events upon a failed NNTP probe.
NNTP Server¶
- File Configuration field:
- szNNTPServer
- Description:
- Either the IP address or resolvable host name of the NNTP server, the NNTP probe is to be run against. You can either use an IPv4, an IPv6 Address, or a Hostname that resolves to an IPv4 or IPv6 Address. This system has been called “remote host” in the description above. Please note that specifying a host name can cause the NNTP probe to fail if DNS name resolution fails (for example due to a failing DNS server). To avoid this, specify an IP address.
NNTP Port¶
- File Configuration field:
- nNNTPPort
- Description:
- This port is to be probed. Please see your server’s reference for the actual value to use. For example, mail servers typically listen to port 25.
General Values (Common settings for most services)¶
Syslog Facility¶
- File Configuration field:
- nSyslogFacility
- Description:
- The Syslog facility to be assigned to events created by this service. Most useful if the message is to forward to a Syslog server.
Syslog Priority¶
- File Configuration field:
- nSyslogPriority
- Description:
- The Syslog priority to be assigned to events created by this service. Most useful if the message is to forward to a Syslog server.
Resource ID¶
- File Configuration field:
- szResource
- Description:
- The Resource ID to be assigned to events created by this service. Most useful if the message is to forward to a Syslog server.
Syslog Tag Value¶
- File Configuration field:
- szSyslogTagValue
- Description:
- The Syslog tag value to be assigned to events created by this service. Most useful if the message is to forward to a Syslog server.
Rule Set to Use¶
- File Configuration field:
- szRuleSetName
- Description:
- Name of the rule set to be used for this service. The Rule Set name must be a valid Rule Set.